Sypris Turns "W" Series Insulating Joint

Brand: Sypris Technologies

Tube Turns Insulated Joints are a pre-fabricated, non-separable, union used to isolate specific sections of pipelines to prevent corrosion caused by stray electrical currents or interference from other pipelines and power transmission cables.

The weld end hubs of our Insulating joints are provided in compliance with the customer’s piping specification. Optional extra-length pipe pups (provided by the customer) can be included in the completed joint.
Features
  • Insulating gasket that prevents metal-to-metal contact across the joint
  • Internal cavities filled with a special dielectric compound
  • Internal and external surfaces coated with two (2) coats of non-conductive epoxy paint, or coating per the customer’s specification.

10600-W-.365-IJ
10" Sypris - Tube Turns " W" Series Monolithic Insulating Joint 10" CL 600 X52 Pipe - .365" wall thickness Overall Dimensions - 17"x17"x13", Weight - 250 lbs Hydrostatic tested to 1.5x design pressure for 15 minutes
8 In Stock
$6,204.00 USD
$15.00 Shipping
2600-W-.218-IJ
2" Sypris - Tube Turns " W" Series Monolithic Insulating Joint 2" CL 600 X52 Pipe - .154" wall thickness Overall Dimensions - , Weight - 15 lbs Hydrostatic tested to 1.5x design pressure for 15 minutes
5 In Stock
$1,538.00 USD
$15.00 Shipping

Specifications

Materials of Construction

  • Materials of Construction The “W" Type Insulated Joint has three basic metallic components, two hubs and a yoke. Two groove welds in the yoke lock the Insulated Joint in an integral unit. STANDARD MATERIALS: ASTM A694/ASME SA105 or SA 106 Gr.C (Minimum Yield 52,000 psi) HIGH YIELD MATERIALS AVAILABLE UPON REQUEST: ASTM A707 ELASTOMER O-RINGS: Viton O-Rings are Standard in each Insulated Joint. Other O-Ring compounds are available upon Request. INSULATED GASKET MATERIAL: Epoxy base/glass fiber reinforced high strength laminate. COATING: Epoxy Base Paint. Coal Tar Epoxy available upon Request.
  • Standard Materials: ASTM A694/ASME SA105 or SA 106 Gr.C (Minimum Yield 52,000 psi)
  • High Yield Materials Available Upon Request: ASTM A707
  • Elastomer O-rings: Viton O-Rings are standard in each Insulated Joint. Other O-Ring compounds are available upon request.
  • Insulated Gasket Material: Epoxy base/glass fiber reinforced high strength laminate.
  • Coating: Epoxy Base Paint. Coal Tar Epoxy available upon request.

Show More