CrystalCalHP Calibration System

Brand: Crystal Pressure

Calibration lab in a box!

This portable gauge and transmitter calibration system is 7 to 10 times faster than a deadweight tester.

It allows you to do a 10 point up and down calibration in less than 3 minutes including printing out a calibration certificate.
Features
  • Gauge / Chart recorder / Transmitter calibration system
  • 7 to 10 times faster than a deadweight tester
  • Reduce transcription / calculation errors
  • 0.1% of reading accuracy up to 15,000 psi (1000 bar) when using the XP2i as the reference or 0.05% of reading accuracy up to 5000 psi (300 bar) when using the 30 Series as the reference
  • Easy to use and install, wizards guide you through setup
  • Includes a weather-proof rolling case that can be used as a portable bench

Specifications

Performance

  • Maximum Hydraulic Pressure: 15000 psi/1000 bar/100 MPa
  • Vacuum: -12.5 psi/-0.86 bar/-86.2 kPa
  • Maximum Pneumatic Pressure: 400 inH₂O/995 mbar/29 inHg
  • Sensitivity (Fine Adjust): 0.01 inH₂O /0.025 mbar
  • Burst Pressure: > 25000 psi /1700 bar /170 MPa

Materials

  • Wetted Materials: Stainless Steel plus Seals and Acrylic Reservoir
  • Enclosure: Anodized Aluminum
  • Seals: Buna-N (Nitrile), Viton, and Urethane
  • Test Media: Water, Oil, or Air

Dimensions

  • Width: 8.3 inches (210 mm)
  • Length: 20.5 in (520 mm)
  • Height (base): 5.5 in (140 mm)
  • Height (with handles): 11 in (280 mm)
  • Weight: 20 Lbs (9 kg)
  • Piston Stroke Volume: 0.8 in³ (13.1 cm³)
  • Reservoir Volume: 10.8 in³ (176.9 cm³)

Connections

  • CPF Male (Installed): MAWP 15,000 psi/1000 bar/100 MPa
  • MPF15K-1/4FPT: MAWP 15,000 psi/1000 bar/100 MPa

Show More